DIY AT HOME - DIY Woodworking Plans - Not Rocket Science $$$

[ad_1]

I found my love for DIY woodworking plans many years ago as a child. I had a 4-H project that my dad helped me with. It was a kitchen towel rack. I won a ribbon, and the rack has hung in my mother's kitchen for years. My dad had all of the tools for DIY woodworking plans. Many years later, I am still developing my little wood shop and tools. Let's take a look at some basic tools needed for woodworking, creating your woodworking space, as well as a few general safety tips.

If you are like me when I began, you do not have a lot of big tools at your access for DIY woodworking plans. That's ok. You do not have to have all of the big stationary tools to begin with DIY woodworking plans. My suggestion is to wait until you find that woodworking is right for you before making major purchases. Beginning tools that I Recommend are:

• Basic tools for marking, such as a speed square, tape, and pencil.
• You can use a circular saw to make straight cuts. Build a guide jig to help you cut straight.
• A jigsaw is good for cutting curves.
• For shaping the wood, the simplest tool is a block plane. You can also use a router to shape the wood, as well as do tongue and groove.
• A cordless drill is great for drilling holes.
• For smoothing, you can use a block sander or a small hand sander. You can find a reasonably priced hand sander at your local hardware store.
• I suggest investing in a good clamp set for DIY woodworking plans. You will need many different sizes. Clamps will securely hold your wood after you glue it.

Along with the tools for DIY woodworking plans, you are going to need a space. This does not have to be the largest space, but I do recommend an area that is mostly undisturbed, sometimes in the garage or basement. Section off an area of ​​the wall to hang your tools. You will also need a sturdy workbench, equipped with a vice for holding things in place. When purchasing a vice, be sure that it is specifically for woodworking, so not to mark or dent the wood.

When woodworking always remember, "safety first!" I used to think I did not need to practice safety. After a few minor scrapes, I've learned better. A few safety precautions for DIY woodworking plans I recommend are:

• Safety goggles: I have learned the hard way more than once by getting sawdust in my eyes. (Luckily nothing worse)
• Use ear protection when running tools, especially for extended periods.
• Keep a face mask handy for tasks such as sanding, when there will be a lot of fine particles in the air.
• If you have children, make sure you unplug the tools and store them properly. Most larger machines have safety switches. Get in the habit early of doing these things so no one else gets hurt!
• Make sure blades and bits are sharp. For instance, a dull blade in a circular saw can cause it to kick back.
• Never alter safety devices on tools! Do not tie off the guard on your circular saw; hold the guard as you cut. If you tie the guard and set the saw down, it could run off; potentially cutting someone.

So you see, DIY woodworking plans are not rocket science. With a few basic tools, a space, and a little imagination, you can begin to create wonderful woodworking projects you can be proud of for many years.

[ad_2]